The Ideal Logic Combi 35 is a high-efficiency combination boiler‚ providing central heating and instant hot water. Available in 24kW‚ 30kW‚ and 35kW models‚ it is wall-mounted‚ compact‚ and energy-efficient‚ achieving an A energy rating for optimal performance and reduced energy consumption.
1.1 Key Features and Benefits
The Ideal Logic Combi 35 boiler is a high-efficiency‚ wall-mounted combination boiler designed for optimal performance. It offers an A energy rating‚ ensuring low energy consumption and reduced utility bills. With outputs of 24kW‚ 30kW‚ and 35kW‚ it provides sufficient heating and hot water for various household sizes. Its compact design saves space‚ while the built-in controls simplify operation. The boiler features a high-efficiency condensing system‚ reducing emissions and improving reliability. It also includes a user-friendly interface and advanced safety features. Regular servicing is straightforward‚ with clear access for maintenance. This boiler is a reliable and cost-effective solution for modern heating needs.
Installation and Servicing Instructions
Ensure minimum clearances: 165mm above‚ 100mm below‚ and 2.5mm at sides. Allow 450mm front clearance for servicing access. Follow manual instructions for gas supply connections and installation.
2.1 System Requirements and Clearances
The Ideal Logic Combi 35 requires specific clearances for safe and efficient installation. Ensure 165mm above‚ 100mm below‚ and 2.5mm at the sides. Allow 450mm front clearance for servicing access. Bottom clearance can be reduced to 5mm with a removable panel. Gas supply connections must use 15mm copper compression. Ensure proper ventilation and comply with local regulations. These clearances and requirements ensure optimal performance‚ safety‚ and ease of maintenance for the boiler.
2.2 Step-by-Step Installation Process
Install the Ideal Logic Combi 35 by following these steps:
- Prepare the installation site‚ ensuring all required clearances are met.
- Connect the gas supply‚ using a 15mm copper compression fitting.
- Fit the flue and ensure proper ventilation.
- Connect water pipes and electrical connections.
- Test the system for leaks and proper function.
Always use approved spare parts and follow safety guidelines for a secure setup.
Maintenance and Troubleshooting
Regular servicing ensures optimal boiler performance. Check for leaks‚ inspect flue‚ and clean components annually. Address common issues like error codes or low pressure promptly to avoid system downtime.
3.1 Regular Maintenance Checks
Regular maintenance is crucial for the Ideal Logic Combi 35 boiler. Inspect the flue and ventilation annually to ensure proper airflow and remove any blockages. Check for water leaks around connections and joints‚ addressing them immediately to prevent damage. Clean the heat exchanger and condensate trap as per the manual to maintain efficiency. Ensure all system pressures are within the recommended range‚ typically between 1-2 bar. Schedule annual servicing by a qualified engineer to verify component functionality and replace worn parts. This routine ensures reliable operation‚ energy efficiency‚ and extends the boiler’s lifespan. Always refer to the user manual for detailed guidance.
3.2 Common Issues and Solutions
Common issues with the Ideal Logic Combi 35 boiler include error codes‚ low water pressure‚ and ignition failures. Error codes like E1 or E5 indicate specific faults‚ which can be diagnosed using the manual. Low water pressure (below 1 bar) can cause the boiler to shut down; topping up via the filling loop usually resolves this. Ignition issues may require resetting the boiler or checking the gas supply. If there’s no hot water‚ ensure the thermostat is set correctly and the timer is functioning. For persistent problems‚ consult a qualified engineer to avoid further complications. Always refer to the manual for troubleshooting guidance.
Technical Specifications
The Ideal Logic Combi 35 features outputs of 24kW‚ 30kW‚ and 35kW‚ with an A-rated energy efficiency‚ natural gas compatibility‚ and advanced condensing technology for optimal performance.
4.1 Output Ratings and Efficiency
The Ideal Logic Combi 35 offers output ratings of 24kW‚ 30kW‚ and 35kW‚ with an A energy rating. Its high efficiency is achieved through condensing technology‚ ensuring minimal energy loss. The boiler’s design optimizes heat transfer‚ making it both reliable and eco-friendly. This results in lower fuel bills and reduced carbon emissions‚ making it a cost-effective choice for homeowners. The boiler’s efficiency is further enhanced by its low water content and high-quality components‚ ensuring consistent performance and durability over time.
Safety Guidelines and Precautions
Ensure the boiler is installed and serviced by a qualified professional‚ adhering to safety standards and manufacturer instructions. Regular checks are essential to maintain safe operation. Keep the boiler area clear of obstructions and ensure proper ventilation. Always follow gas safety regulations and electrical connection guidelines. Do not tamper with internal components unless authorized. Maintain required clearances around the boiler for servicing. In case of malfunction‚ shut off the gas supply and contact a certified technician. Never attempt repairs without proper training. Adhere to all safety precautions to avoid risks and ensure reliable performance.
Energy Efficiency and Performance
The Ideal Logic Combi 35 achieves high energy efficiency with its A-rated performance‚ utilizing condensing technology to maximize heat recovery and reduce energy waste effectively.
6.1 How the Boiler Achieves High Efficiency
The Ideal Logic Combi 35 boiler achieves high efficiency through its advanced condensing technology‚ which captures and reuses heat from flue gases that would otherwise be lost. This process significantly reduces energy waste and improves overall performance; Additionally‚ the boiler features a low water content design and a high-efficiency heat exchanger‚ further enhancing its ability to deliver consistent heat while minimizing fuel consumption. These innovations ensure the boiler operates at an A energy rating‚ making it both eco-friendly and cost-effective for homeowners seeking reliable and sustainable heating solutions.
6.2 Energy-Saving Features
The Ideal Logic Combi 35 incorporates advanced energy-saving features‚ including a high-efficiency condensing system that reduces fuel consumption by reusing heat from flue gases. Its modulating burner adjusts heat output to demand‚ minimizing energy waste. The boiler also features intelligent controls that optimize performance based on usage patterns‚ ensuring efficient operation. Additionally‚ its compact design and low water content contribute to faster heat-up times and reduced standby losses. These features collectively enhance energy efficiency‚ lowering utility bills and environmental impact while maintaining reliable heating and hot water delivery.
User Interface and Controls
The Ideal Logic Combi 35 features a user-friendly interface with a clear digital display and simple controls‚ allowing easy adjustment of heating and hot water settings for optimal comfort.
7.1 Navigating the Boiler Controls
The Ideal Logic Combi 35 features an intuitive control panel with a digital display‚ making it easy to navigate and adjust settings. The interface includes a mode selector switch‚ temperature adjustment buttons‚ and indicators for heating and hot water operation. Users can toggle between central heating‚ hot water‚ or pre-set modes. The display provides clear feedback on current settings and operational status. Additional buttons allow for timer programming and energy-saving adjustments. The controls are designed to be user-friendly‚ ensuring seamless operation and customization of heating preferences. By following the on-screen prompts‚ users can efficiently manage their boiler’s performance and energy usage.
7.2 Adjusting Settings for Optimal Performance
To optimize the Ideal Logic Combi 35 boiler’s performance‚ users can adjust various settings via the control panel. The temperature adjustment buttons allow for precise control of central heating and hot water temperatures. The timer function enables scheduling of heating periods‚ enhancing energy efficiency. Additionally‚ the boiler features an energy-saving mode that reduces energy consumption during periods of low demand. By adjusting these settings according to individual needs‚ users can balance comfort and energy savings. Refer to the user manual for detailed guidance on customizing these settings to achieve the best performance and efficiency for your home.
The Ideal Logic Combi 35 boiler is a reliable and efficient solution for home heating and hot water needs. With its compact design‚ high energy efficiency‚ and user-friendly controls‚ it offers excellent performance while minimizing energy consumption. Regular maintenance and proper adjustment of settings ensure optimal functionality and longevity. By following the guidelines outlined in this manual‚ users can maximize the boiler’s efficiency and enjoy consistent comfort. The Ideal Logic Combi 35 is a practical choice for modern households seeking a balance between reliability‚ energy savings‚ and ease of use.